Table of Contents
Advertisement
Appendix C - IP Address Configuration
To connect to a network, make sure the proper
network settings are configured for the DWL-G132.
For
Microsoft Windows XP:
Go to Start > right click on
select Properties > Double-click on the Network
Connection associated with the DWL-G122.
Click
Internet Protocol (TCP/IP)
Click
Properties
Dynamic IP address setup
Used when a
DHCP server
the local network. (i.e. Router)
Select
Obtain an IP address
automatically
Router or Access Point has
DHCP server enabled)
Select
Obtain DNS server
address automatically
Click
OK
Static IP address setup
Used when a
DHCP server
on the local network.
Select
Use the following IP address
IP address:
192.168.0.28
Subnet mask:
255.255.255.0
Input a static IP address in the same range
as the Wireless Router or Access Point.
Click
OK
My Network Places
is available on
(if the Wireless
is not available
>
10
Advertisement
Table of Contents
