Appendix B - Ip Address Configuration - D-Link Super G MIMO DWL-G650M Quick Installation Manual

Appendix B - IP Address Configuration

Appendix B - IP Address Configuration
Appendix B - IP Address Configuration
Appendix B - IP Address Configuration Appendix B - IP Address Configuration
To connect to a network, make sure the proper
network settings are configured for DWL-G650M.
Microsoft Windows XP:
Go to Start, right click on
select Properties, and Double-click on the
Network Connection associated with the
DWL-G650M.
Click Internet Protocol (TCP/IP)
Click Properties
Dynamic IP address setup
Used when a DHCP server
the local network. (i.e. Router)
Select
automatically
Access Point has DHCP server enabled)
Select Obtain DNS server
address automatically
Click OK
Static IP address setup
Used when a DHCP server
on the local network.
Select Use the following IP address
IP address:
Subnet mask:
Input a static IP address in the same range
as the Wireless Router or Access Point.
Click OK
My Network
is available on
Obtain an IP address
(if the Wireless Router or
is not available
192.168.0.52
255.255.255.0
Places,
10
D-Link Super G MIMO DWL-G650M