Warning Code - Epson WF-M1560 Programming Manual

7.3 Warning code

Structure
Parameter counter
The parameter <warning code> is one-byte Binary and indicates the warning code as follows,
<warning code> is consisted of the several fields as shown below.
When several warning appears at the same time, reply all the warning codes with the format below.
value [value value ].
<warning code> field is recognized in the following warning state. (This field is not recognized in @BDC-ST character string
when no warning is received)
For ink low warning, the order depends on the ink cartridge order.
The parameter is as follows.
Warning
Ink low (Black)
Cleaning disable (Black)
Ink low warning (10H) occurs when ink quantity is less than defined amount.
If the ink quantity is less than the amount that can execute head cleaning, Cleaning disable warning (51H) occurs with the ink
low warning (10H) together.
Revision: 1
Item Byte (Hex)
Header 1
1
Parameter n
Value (Hex)
04
Warning kinds
Occurred all warning code
Warning code
10h
51h
2012/10/15
Page: 73