Table of Contents
Advertisement
Appendix (Continued)
Using the Configuration Utility
A.
Status:
Displays the
MAC Address of the
Access Point that is
associated with the
DWL-AG650.
D.
Wireless Mode:
The factory setting is
set to Infrastructure.
Ad-Hoc mode is used
for peer-to-peer
networking.
G.
Channel:
Dis-
plays the channel
information. By
default, the channel
is set to 6 and
selection is auto-
matically deter-
mined by the DWL-
AG650.
:
B.
SSID
The Service Set
Identifier is the name
assigned to the wireless
network. The factory
SSID setting is set to
default.
A
B
C
D
E
F
G
H
I
E.
Encryption:
current encryption status of
the wireless connection.
H.
Link Quality / Signal
Strength:
Displays the Link
Quality for the DWL-AG650
wireless connection to the
access point. The Signal
Strength represents the
wireless signal between the
access point and the DWL-
G650. The percentage
coincides with the graphical
bar.
C.
Frequency:
frequency used by the current
connection to the Access Point.
F.
Displays the
setting is Auto; mean-
ing, TxRate settings are
automatically deter-
mined by the DWL-
AG650 depending on
the distance from the
access point.
8
Displays the current
TxRate:
The default
I.
Data Rate:
Graphically displays
the statistics of data
transmitted and
received.
Advertisement
Table of Contents
