D-Link DWL-AG132 Manual page 15

DWL-AG132 User's Manual
Configuration
Wireless Mode:
Data Encryption:
Authentication:
Key Length:
D-Link Systems, Inc.
The Service Set Identifier is the name assigned to the wireless
SSID:
network. The factory SSID setting is default.
Either Infrastructure or Ad-Hoc will be displayed here. (Please see
the Getting Started section in this manual for an explanation of these
two modes.)
Select Enabled or Disabled.
Choose one of the following modes:
Open Authentication - the DWL-AG132 is visible to all
devices on the network.
Shared Authentication - allows communication only with
other devices with identical WEP settings.
Auto - will automatically adjust to the Authentication mode of
the wireless access point or router.
Select the key length and either ASCII (e.g., a word) or hexadecimal
format.*
Using the Configuration Utility
15