Do Not Disturb - Polycom SoundStation IP 5000 Quick Start Manual

Quick Start Guide: Polycom 5000 SoundStation IP Phone
Voice Mail
An icon on the phone screen, LEDs flashing red, and a stutter dial tone indicate new voice mail messages.
1. Press
2. Select Features > Messages > Message Center.
3. Press the Connect soft key.
4. Follow the voice and visual prompts on the screen.

Do Not Disturb

You can configure this feature on the My Phone dashboard. Refer to the
information.
1. Press
2. Select Features > Do Not Disturb.
3. Press
Ring Type
You can select different rings to match your preferences and distinguish between calls on lines.
Change Incoming Ring
1. Press
2. Select Settings > Basic > Ring Type.
3. Scroll to highlight the ring type you want.
4. Press the Play soft key to hear it.
5. Press
Set the Ring Tone for a Specific Contact
1. Press
2. Select Features > Contact Directory.
3. Press the Edit soft key.
4. Press the Next soft key to scroll through the ring types.
5. Enter a number that corresponds to one of the available ring types.
6. Press the Save soft key.
Note: To exit the screen and find the number associated with the ring type, press
Settings > Basic > Ring Type.
6
.
.
to toggle it on/off.
.
to select the ring type you want.
.
Do Not Disturb User Guide
twice and select
for more