Using The Configuration Utility - D-Link DWL-700AP Manual

DWL-700AP User's Manual
If you wish to change the default settings or optimize the performance of the DWL-700AP, D-Link has
included a configuration utility for this purpose.
Whenever you want to configure your network or the DWL-700AP, you can access the Configuration Utility
by opening the web-browser and typing in the IP address of the DWL-700AP. The DWL-700AP's default IP
address is shown below:


(The IP address shown in the example above is the default setting. Use this IP address when connecting to
a network consisting of other D-Link devices set to their default settings. If you have changed the IP address
of the DWL-700AP to conform to a network other than one with D-Link devices, then input that IP address in
the web browser, instead of the default IP address shown.)



D-Link Systems, Inc.
Using the Configuration Utility
Open the web browser
Type in the IP address of
the access point
Type admin in the
User name field
Leave the Password
blank
Click OK
Using the Configuration Utility
9