D-Link DWL-700AP Manual page 14

DWL-700AP User's Manual
Using the Configuration Utility (continued)
D-Link Systems, Inc.
Advanced > Mode
Access Point:
Select this option to use the DWL-700 AP as an access point in your
network.
Wireless Client:
Select this option to use the DWL-700AP as a wireless client in your
network. A wireless client is a device that connects to the network through a router or
an access point.
Remote AP MAC:
DWL-700AP will connect when it is in wireless client mode.
Site Survey:
Click the Site Survey button to select a remote AP to which you
wish to connect.
Repeater:
Select this option to use the DWL-700AP to extend the reach of a remote
AP by repeating the signal.
Remote AP MAC:
range extended by the DWL-700AP.
Site Survey:
Click the Site Survey button to select a remote AP that you wish
to repeat.
Input the MAC Address of the remote AP to which the
Input the MAC Address of the remote AP that will have its
Using the Configuration Utility
14