D-Link AirPlus Xtreme G DWL-2000AP Manual page 15

High-speed 2.4 ghz wireless access point

Hide thumbs Also See for AirPlus Xtreme G DWL-2000AP:

Table of Contents

Using the Conﬁguration Menu (continued)

Home > Wireless

SSID-

Service Set Identiﬁer (SSID) is the name designated for a speciﬁc

wireless local area network (WLAN). The SSID's factory default setting

is default. The SSID can be easily changed to connect to an existing

wireless network or to establish a new wireless network.

Channel-

6 is the default channel. All devices on the network must share the

same channel.

WEP-

Wired Equivalent Privacy (WEP) is a wireless security protocol for Wireless

Local Area Networks (WLAN). WEP provides security by encrypting the

data that is sent over the WLAN. Select Enabled or Disabled. Disabled is

the default setting. (Note: If you enable encryption on the DWL-2000AP

make sure to also enable encryption on all the wireless clients or wireless

connection will not be established.)

WEP

Encryption-

Select the level of encryption desired: 64-bit, or 128-bit

Key Type-

Hexadecimal digits consist of the numbers 0-9 and the letters A-F

ASCII (American Standard Code for Information Interchange) is a code for representing English

letters as numbers from 0-127

Keys 1-4-

Input up to 4 WEP keys; select the one you wish to use.

Apply-

Click Apply to save the changes.

Select HEX or ASCII

Table of Contents

Show Quick Links

Table of Contents