Memory Module - Lenovo ThinkPad E590 User Manual

Hide thumbs Also See for ThinkPad E590:

Table of Contents

Memory module

Prerequisite

Before you start, read Appendix A "Important safety information" on page 65 and print the following

instructions.

Attention: Do not touch the contact edge of the memory module. Otherwise the memory module might get

damaged.

Replacement procedure

To replace a memory module, do the following:

1. Disable the built-in battery. See "Disable Fast Startup and the built-in battery" on page 35.

2. Turn off the computer and disconnect the computer from ac power and all connected cables.

3. Close the computer display and turn the computer over.

4. Remove the base cover assembly. See "Base cover assembly" on page 36.

5. Open the latches on both sides of the memory slot at the same time

module

Note: A Mylar film might cover the memory module. To access the memory module, open the film first.

E590 and R590 User Guide

, and then remove the memory

Table of Contents

Thinkpad r590