Set Up An Iptv Port To Lease An Intranet Port - NETGEAR R6700v3 User Manual

7. Click the Add button.
8. Specify the settings as described in the following table.
Field Description
Name Enter a name for the VLAN tag group.
The name can be up to 10 characters.
VLAN ID Enter a value from 1 to 4094.
Priority Enter a value from 0 to 7.
Wired Ports If your device is connected to an Ethernet port on the router, select the Wired Ports
check box that corresponds to the Ethernet port on the router that the device is
connected to.
Wireless If your device is connected to your router's WiFi network, select the Wireless check box
that corresponds to the router's WiFi network that the device is connected to.
Note: You must select at least one Wired Ports or Wireless check box. You can select more than one
check box.
9. Click the Add button.
The VLAN tag group is added.
10. Click the Apply button.
Your settings are saved.

Set Up an IPTV Port to Lease an Intranet Port

You can set up the router to create an Internet Protocol television (IPTV) port that can
lease an IP address from your IPTV service provider. Use this feature only if you subscribe
to an IPTV service and your IPTV service requires an intranet address.
Some IPTV ports cannot work behind NAT because the IPTV port requires an IP address
within the Internet service provider's network (intranet address). You can set up a bridge
connection from the WAN to one of the LAN ports. When IPTV is connected through
WiFi, the home router also must support the bridging of the WAN port to the WiFi
network name (SSID). The designated LAN port or WiFi name becomes an IPTV port
with direct access to the WAN without going through NAT.
Network Settings
Nighthawk AC1750 Smart WiFi Router
75 User Manual