Set Up A Bridge For A Port Group Or Vlan Tag Group; Set Up A Bridge For A Port Group - NETGEAR R6700v3 User Manual

Set Up a Bridge for a Port Group or VLAN
Tag Group
Some devices, such as an IPTV, cannot function behind the router's Network Address
Translation (NAT) service or firewall. Based on what your Internet service provider (ISP)
requires, for the device to connect to the ISP's network directly, you can enable the
bridge between the device and the router's Internet port or add new VLAN tag groups
to the bridge.
Note: If your ISP provides directions on how to set up a bridge for IPTV and Internet
service, follow those directions.

Set Up a Bridge for a Port Group

If the devices that are connected to the router's Ethernet LAN port or WiFi network
include an IPTV device, your ISP might require you to set up a bridge for a port group
for the router's Internet interface.
A bridge with a port group prevents packets that are sent between the IPTV device and
the router's Internet port from being processed through the router's Network Address
Translation (NAT) service.
To configure a port group and enable the bridge:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > VLAN / IPTV Setup.
The VLAN / IPTV Setup page displays.
5. Select the Enable VLAN/IPTV Setup check box.
The page expands.
6. Select the By bridge group radio button.
7. Select a Wired Ports check box or a Wireless check box.
Network Settings
Nighthawk AC1750 Smart WiFi Router
73 User Manual