Advertisement
Installation Instructions
Choose Your Mounting Location
A good mounting location is important to getting the best performance out of your GR60
access point. Keep the following in mind:
1. The device should have unobstructed line of sight to most coverage areas. For
example, if installing in an office filled with workspaces divided by mid-height cubicle
walls, installing on the ceiling or high on a wall would be ideal.
2. Power over Ethernet supports a maximum cable length of 300 ft (100 m).
3. If being used in a mesh deployment, the GR60 should have line of sight to at least
two other Meraki devices. A Cisco Partner can help ensure that your AP placement is
ideal.
Install the GR60
For most mounting scenarios, the GR60 mount cradle provides a quick, simple, and flexible
means of mounting your device. The installation should be done in two steps. First, install
the mount cradle to your selected location. Then, attach the GR60 to the mount cradle
Mount the GR60
Attach the GR60 to the Mount Cradle
Advertisement
