Table of Contents
Advertisement
Quick Links
GR10 Installation Guide
The Cisco Meraki GR10 is a dual-band enterprise class 802.11ac cloud-managed access point.
Package Contents
The GR10 package contains the following:
• GR10 Cloud-Managed Access Point
•
Mount plate
Questo manuale d'istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per
HW-EU
o cerca il tuo prodotto tra le
migliori offerte di Wireless e Bluetooth
Cisco Meraki GR10-
1
Advertisement
Table of Contents
Related Manuals for Cisco Meraki GR10
Summary of Contents for Cisco Meraki GR10
- Page 1 Wireless e Bluetooth GR10 Installation Guide The Cisco Meraki GR10 is a dual-band enterprise class 802.11ac cloud-managed access point. Package Contents The GR10 package contains the following: • GR10 Cloud-Managed Access Point •...
- Page 2 • Mount Kit ◦ Wall screws, wall screw anchors, and security screws Understanding the GR10 Your Meraki GR10 has the following features:...
-
Page 4: Security Features
The mount plate has the following features: Security Features The GR10 features multiple options for physically securing the access point after installation: 1. Security screw – The accessory kit includes screws that can be used to secure the access point to the mount cradle. -
Page 5: Factory Reset Button
Factory Reset Button If the button is pressed and held for at least five seconds and then released, the GR10 will reboot and be restored to its original factory settings by deleting all configuration information stored on the unit. LED Indicators and Run Dark Mode Your GR10 is equipped with a multi-color LED light on the front of the unit to convey information about system functionality and performance: •... -
Page 6: Collect Tools
for your particular organization can be found here. Assigning IP Addresses to GR10s All gateway GR10s (GR10s with Ethernet connections to the LAN) must be assigned routable IP addresses. These IP addresses can be dynamically assigned via DHCP or statically assigned. Dynamic Assignment When using DHCP, the DHCP server should be configured to assign a static IP address for each MAC address belonging to a Meraki AP. -
Page 7: Collect Additional Hardware For Installation
Collect Additional Hardware for Installation You will need the following hardware to perform an installation: Installation Instructions Choose Your Mounting Location A good mounting location is important to getting the best performance out of your GR10 access point. Keep the following in mind: 1. - Page 8 2. Power over Ethernet supports a maximum cable length of 300 ft (100 m). 3. If being used in a mesh deployment, the GR10 should have line of sight to at least two other Meraki devices. A Cisco Partner can help ensure that your AP placement is ideal. Mount the GR10 Attach the GR10 to the Mount Cradle The GR10 attaches to the mount cradle with two tabs on the cradle that insert into the GR10, and is secured to the cradle using one screw.
- Page 11 To release the GR10 from the mount cradle, first remove the security screw that secures the GR10 to the cradle’s bottom tab. While holding the GR10 with one hand, press the cradle’s bottom tab upwards, releasing the GR10 from the bottom of the cradle. Then remove the GR10 from the cradle’s top tab. Desk or Shelf Mount The GR10 can be placed on a desk or shelf resting on the non-scratch rubber feet.
-
Page 12: Verify Device Functionality And Test Network Coverage
Secure the GR10 Depending on your mounting environment, you may want to secure the GR10 to its mount location. Your GR10 can be secured in several ways. If the GR10 has been installed using the mount cradle, it should be secured via security screw (Torx security screws are included) and/or Kensington lock. If the mount cradle was not used, the GR10 can still be secured using a Kensington lock. - Page 13 • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution Any changes or modifications no expressly approved by Meraki could void the user’s authority to operate this equipment.
- Page 14 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 電磁波曝露量MPE標準值1mW/cm ，本產品使用時建議應距離人體 20 cm。 1. 使用此產品時應避免影響附近雷達系統之操作。 2. 高增益指向性天線只得應用於固定式點對點系統。...