Help - BT STUDIO 1100 User Manual

Help

Many common problems are caused by the telephone and power cables being incorrectly
connected, not connected at all, or the power being turned off.
Please check that your BT Studio 1100 has been correctly set up, see page 6, before
ringing the BT Studio 1100 Helpline.
Problems
No display
No dial tone
You cannot link up
with the base station
Possible cause
The batteries may be flat or dead.
Recharge or replace the batteries, see page 7.
Is the telephone line cord plugged into the telephone
wall socket?
Check that the base station is connected to the mains
power and switched on.
Is the icon flashing in the display?
The mains power cable may not be connected at the
base or switched on.
Are you in range of the base? Move closer to the base.
The batteries could be low or flat.
Recharge or replace the batteries.
43