Setting Up Channels; Scanning For Channels; Skipping Channels - Vizio D32h-F1 User Manual

SETTING UP CHANNELS

You can use the TV's Channels menu to:
• Find Channels
Channels
• Select channels to skip
• Analog Audio Find Channels
Skip Channels
• Digital Audio
Analog Audio
• Set Parental Controls
Digital Audio
Parental Controls

Scanning for Channels

The TV may need to scan for channels before it can display programs
and their associated information. A channel scan is required for
free over-the-air channels (using an antenna) and cable channels
from an out-of-the-wall connection (without a cable box). Moving
Back
the TV to an area with different channels requires the TV to scan for
channels again.
To perform an Auto Channel Scan:
Stereo
English 1. From the CHANNELS menu,
highlight Find Channels, and
press OK. The auto channel scan
begins.
2. Wait until the channel scan is
100% complete. Highlight Done
and press OK.
3. Press the Exit button on the
remote.
If the channel scan is cancelled,
the channels that were already
discovered are retained. A new
channel scan will clear all channels.

Skipping Channels

After a channel scan is completed, you may find that some channels
are too weak to watch comfortably. There may also be some
channels you do not want to view. You can remove these channels
from the TV's memory with the Skip Channel feature.
Channels that have been removed with the Skip
Channel feature can still be viewed if the channel
is entered using the Number Pad. If you wish to
completely block a channel from being viewed, use the
parental controls. See Locking and Unlocking Channels .
To remove a channel:
1. From the CHANNELS menu,
highlight Skip Channel, and
Back
Find Channels press OK. The SKIP CHANNEL
menu is displayed.
Channels Found
Digital 2. For each channel you wish to
remove, use the Up/Down
Analog
Arrow buttons on the remote to
45% Complete
highlight the channel and press
Cancel
OK. A appears to the right of
P
each channel you select.
3. When you have selected all
of the channels you wish to
remove, press the Exit button
on the remote.
3
Back
Skip Channels
0 Test 0
1 Test 1
2 Test 2
3 Test 3
4 Test 4