Setting Up Channels; Selecting A Channel Source; Scanning For Channels; Adding New Channels - Vizio D50u-D1 User Manual

SETTING UP CHANNELS

You can use the TV's Channels menu to:
• Select a Channel Source
VIZIO
• Find Channels
CHANNELS
• Perform a Partial Channel Scan
Channels not searched
• Manually Add Channels
Channel Source
Find Channel
• Select channels to skip
Partial Channel Search
Add Analog Channel
Skip Channel
Analog Audio
Digital Language

Selecting a Channel Source

Select the type of tuner input you will be using. You can select either
Antenna (Over-the-air) or Cable (Out-of-the-wall) connections.
1. From the CHANNELS menu, highlight Channel Source and
press OK. The CHANNEL SOURCE menu displays.
2. Highlight Antenna or Cable and press OK. Press EXIT.
Cable

Scanning for Channels

The TV may need to scan for channels before it can display programs
and their associated information. A channel scan is required for
free over-the-air channels (using an antenna) and cable channels
Stereo
from an out-of-the-wall connection (without a cable box). Moving
English
channels again.
To perform an Auto Channel Scan:
1. From the CHANNELS menu,
highlight Find Channels, and
press OK. The auto channel scan
begins.
2. Wait until the channel scan is
100% complete. Highlight Done
and press OK.
3. Press the EXIT button on the
remote.
If the channel scan is cancelled,
the channels that were already
discovered are retained. A new
channel scan will clear all channels.

Adding New Channels

Occasionally, you may need to add a new range of channels or
add a new analog channel. You can do this by using the Partial
Channel Search and Add Analog Channel options. This is quicker
than scanning all possible channels.
To add a range of new channels:
1. From the CHANNELS menu, highlight Partial Channel Search,
and press OK. The PARTIAL CHANNEL SEARCH menu is
displayed.
2. Highlight Scan Mode and select the type of channel you are
adding: Analog, Digital, or Analog/Digital.
3. Highlight From Channel and enter the channel where you
want to begin the scan. (Use the Left Arrow button to
backspace. Use the Number Pad on the remote to enter the
channel.)
VIZIO
4. Highlight To Channel and enter the channel where you want
to end the scan. (Use the Left Arrow button to backspace. Use
FIND CHANNELS
the Number Pad on the remote to enter the channel.)
Channels Found
Digital: 0
5. Highlight Start and press OK. The partial channel search
Analog: 19
begins.
18% Complete
Cancel 6. Wait until the partial channel search is 100% complete.
Highlight Done and press OK.
7. Press the EXIT button on the remote.
Cancel the channel scan.
4
36