Warning Symbols - Beko DU 7133 GA0 User Manual

C
NOTE
• Extra programs may vary according to the specifications of your machine.
• In order to receive better results from drying machine programs, your laundry should
be washed with the appropriate program in your washing machine and wringed with
recommended wringing revolution..
• Very little dampness might remain on the shirts after the program. It is recommended that
you do not leave the shirts in the drying machine
• It is recommended to dry your delicates in laundry bag to prevent wrinkles and damage.
When the program ends, take your laundry out of the machine immediately and hang them
to prevent wrinkles.
* : Energy Label standard program (EN 61121:2012) "All the filters must be cleaned prior to
test series."All the values in the table are determined according to EN 61121:2012 standard.
Consumption values may vary from the values in the table depending on laundry type, wringing
revolution, ambient conditions and changes in voltage.
5.6 Auxiliary functions
Sound warning cancel
Drying machine makes sound warnings
when the program is completed. If you don't
want sound notifications, press the "Sound
Notification" button.
When you press the sound notification button
it lights up, and program does not make sound
notifications when completed.
C
NOTE
• You can select this function before or
after the program starts.

5.7 Warning symbols

C
NOTE
• Warning symbols may vary according to
the specifications of your machine.
Fiber filter cleaning
When the program is completed, a warning led
lights up, which indicates that the filter has to
be cleaned.
Dryer / User Manual
"Cotton cupboard dry programme" used at full and partial load is the standard drying programme to
which the information in the label and the fiche relates, that this programme is suitable for drying normal
wet cotton laundry and that it is the most efficient programme in terms of energy consumption for
cotton.
C
NOTE
• If the filter cleaning led blinks, see the
„Troubleshooting" chapter.
Water tank
When the program is completed, a warning led
lights up, which indicates that the water tank
must be emptied.
If the water tank fills up while the program is
running, warning led starts blinking and the
machine goes into stand-by. In that case
empty the water in the water tank and start
the program by pressing the Start / Pause
button. Warning led turns off and the program
resumes.
13