Advertisement
The Setup Wizard (continued)
If your ISP uses
(Point-to-Point Protocol
over Ethernet), and this
option is selected, then
this screen will appear:
Please be sure
to remove any
existing PPPoE client
software installed on
your computers.
Enter in the username
and password provided
to you by your ISP.
Click
Next
Step 4
–
Wireless
Setup.
The default wireless
settings for your 802.11a
wireless network are:
SSID = default
Channel = 52
Turbo Mode = Off
Click
Next
You can change these
settings to match an
existing wireless network.
Click
Next
PPPoE
Advertisement
