D-Link DI-624 User Manual page 68

Frequently Asked Questions (continued)
Why can´t I access the web based configuration? (continued)
Step 4
Check your IP Address. Your computer must have an IP Address in the
same range of the device you are attempting to configure. Most D-Link devices use
the 192.168.0.X range.
How can I find my IP Address in Windows 95, 98, or
ME?
Step 1
Click on Start, then click on Run.
Step 2 The Run Dialogue Box will appear. Type winipcfg in the window as
shown then click OK.
Step 3 The IP Configuration window will appear, displaying your Ethernet
Adapter Information.

Select your adapter from the drop down menu.

If you do not see your adapter in the drop down menu, your adapter is
not properly installed.
Step 4 After selecting your adapter, it will display your IP Address, subnet
mask, and default gateway.
Step 5 Click OK to close the IP Configuration window.
68