Using the Configuration Menu (continued)
Home > WAN > PPPoE continued
MTU-
Auto-reconnect-
LAN is short for Local Area Network. This is considered your internal network. These
are the IP settings of the LAN interface for the DI-624. These settings may be referred
to as Private settings. You may change the LAN IP address if needed. The LAN IP ad-
dress is private to your internal network and cannot be seen on the Internet.
IP Address-
Subnet Mask-
Local Domain-
Maximum Transmission Unit-1492 is the default setting-you
may need to change the MTU for optimal performance with
your specific ISP.
If enabled, the DI-624 will automatically connect to your ISP
after your system is restarted or if the PPPoE connection is
Home > LAN
The IP address of the LAN interface. The default IP address
is: 192.168.0.1
The subnet mask of the LAN interface.
The default subnet mask is 255.255.255.0
This field is optional. Enter in the local domain name.
17