D-Link AirPlus DI-614+ Manual page 54

Troubleshooting
4. Resetting the DI-614+ to Factory Default Settings
After you have tried other methods for troubleshooting your network, you
may choose to Reset the DI-614+ to the factory default settings. Remember
that D-Link AirPlus products network together, out of the box, at the factory
default settings.
To hard-reset the D-Link AirPlus DI-614+ to Factory Default Settings, please do the
following:
Locate the Reset button on the back of the DI-614+.

 Use a paper clip to press the Reset button.

Hold for about 10 seconds and then release.

After the DI-614+ reboots (this may take a few minutes) it will
be reset to the factory Default settings.
54