D-Link AirPlus DI-614+ Manual page 11

Using the Configuration Menu
Home > Wireless
Wireless Settings are settings for the (Access Point) Portion of the Wireless Router.
It allows you to change the wireless settings to fit an existing wireless network or to
customize your wireless network.
Enabled or Disabled
SSID
Channel
Auto Scan
By default, Wireless is Enabled. If you do not want to use the
Wireless feature on the DI-614+, you can disable it by selecting
Disabled.
Service Set Identifier (SSID) is the name designated for a specific
wireless local area network (WLAN). The SSID's factory default
setting is "default". The SSID can be easily changed to connect
to an existing wireless network or to establish a new wireless
network.
Indicates the channel setting for the DI-614+. By default the
channel is set to 6. The Channel can be changed to fit the
channel setting for an existing wireless network or to customize
the wireless network.
Click the check box to enable Auto Scan. Enabling this will allow
the device to detect the best wireless channel to use.
11