D-Link AirPlus DI-614+ Manual page 17

Using the Configuration Menu
Home > WAN > Static IP Address
Choose Static IP Address if all WAN IP information is provided to you by your ISP.You will
need to enter in the IP address, subnet mask, gateway address, and DNS address(es)
provided to you by your ISP. Each IP address entered in the fields must be in the
appropriate IP form, which are four IP octets separated by a dot (x.x.x.x). The Router
will not accept the IP address if it is not in this format.
IP Address
Subnet Mask
ISP Gateway
MAC Address
Clone
MAC Address
Primary DNS
Address
Secondary DNS
Address
MTU
Input the IP Address provided by your ISP.
Input the Subnet Mask provided by your ISP.
Input the Gateway address provided by your ISP.
The default MAC Address is set to the WAN's physical interface
MAC address on the Router.
This feature will copy the MAC address of the Ethernet card, and
replace the WAN MAC address of the Router with this Ethernet
card MAC address. It is not recommended that you change the
default MAC address unless required by your ISP.
Input the primary DNS address provided by your ISP.
(Optional) Input the Secondary DNS address provided by
your ISP.
Maximum Transmission Unit; default is 1500; you may need to
change the MTU to conform to your ISP.
17