Access Control List (Acl) Commands - D-Link DGS-3224SR Command Line Interface Reference Manual

DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
A
CCESS
(ACL) C
The DGS-3224SR implements Access Control Lists that enable
the switch to deny network access to specific devices or device
groups based on IP settings or MAC address.
Command Parameters
create [ethernet {vlan | source_mac <macmask> |
access_profile destination_mac <macmask> | 802.1p |
ethernet_type}| ip {vlan | source_ip_mask
<netmask> | destination_ip_mask
<netmask> | dscp | [icmp {type | code} |
igmp {type} | tcp {src_port_mask <hex 0x0-
0xffff> | dst_port_mask <hex 0x0-0xffff>} |
udp {src_port_mask <hex 0x0-0xffff> |
dst_port_mask <hex 0x0-0xfff>} |
protocol_id {user_mask <hex 0x0-
0xffffffff>}]}]{[permit | deny] profile_id
<value 1-8>}
delete profile_id <value 1-8>
access_profile
config profile_id <value 1-8> [add access_id
access_profile <value 1-50> [ethernet {vlan <vlan_name
32> | source_mac <macaddr> |
destination_mac <macaddr> | 802.1p
<value 0-7> | ethernet type <hex 0x0-0xfff>}
C
ONTROL
OMMANDS
229
20
L
IST