Sound Settings; Ring Tone (Menu 4.1); Ring Volume - Samsung SGH-X105 Manual

Call Records
Max Cost: maximum cost set in the Set Max Cost
option. See below.
Reset Counters: option used to reset the cost
counter. You must first enter your PIN2 (see
page 131) and then press the OK soft key.
Set Max Cost: option used to enter the maximum
cost that you authorize for your calls. You must first
enter your PIN2 (see page 131) and then press the
OK soft key.
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls. You must first enter your PIN2
(see page 131) and then press the OK soft key.
88

Sound Settings

You can use the Sound Settings feature to
customize various settings, such as the:
• ring melody, volume and type.
• sounds made when you press a key, receive a
message or switch your phone on/off.
• alert tone made every minute during a call, when
you make an error or when your call is connected
to the system.
Note: When the phone is in the silent mode (see
page 27), you cannot change the sound
settings.
Ring Tone
(Menu 4.1)
This option allows you to select a ring melody.
You can choose between many different melodies.
Each time you select a melody, it plays for a few
seconds. If you have downloaded sounds from the
Internet, you can use them in this menu.

Ring Volume

(Menu 4.2)
This option allows you to adjust the ring volume to
one of five levels.
Use the Up and Down keys or the
the left side of the phone to increase or decrease
the volume.
and keys on
89