Command Syntax - D-Link DGS-3024 Command Line Interface Reference Manual

The following symbols are used to describe how command entries are made and values and arguments are specified in this
manual. The online help contained in the CLI and available through the console interface uses the same syntax.
<angle brackets>
Purpose
Syntax
Description
Example
Command
[square brackets]
Purpose
Syntax
Description
Example
Command
| vertical bar
Purpose
Syntax
Description
Example
Command
DGS-3024 Layer 2 Switch CLI Reference Manual
Note: All commands are case-sensitive. Be sure to disable Caps Lock or
any other unwanted function that changes text case.
Encloses a variable or value that must be specified.
create ipif <ipif_name> vlan <vlan_name 32> ipaddress
<network_address>
In the above syntax example, you must supply an IP interface name in the
<ipif_name> space, a VLAN name in the <vlan_name 32> space, and the
network address in the <network_address> space. Do not type the angle
brackets.
create ipif Engineering vlan Design ipaddress 10.24.22.5/255.0.0.0
Encloses a required value or set of required arguments. One value or
argument can be specified.
create account [admin | user]
In the above syntax example, you must specify either an admin or a user
level account to be created. Do not type the square brackets.
create account admin
Separates two or more mutually exclusive items in a list, one of which must
be entered.
show snmp [community | detail]
In the above syntax example, you must specify either community, or
detail. Do not type the vertical bar.
show snmp community
9
C S
OMMAND
3
YNTAX