Listening To The Sound Of Other Audio Devices; Auto Standby - JVC EX-AK1 Instructions Manual

Listening to the sound of
other audio devices
Connect other audio devices to this system in
advance (A page 11).
1
Press FM/AM/AUX/TV SOUND to
select "AUX" or "SOUND TV" on the
display window on the main unit.
• Each time you press FM/AM/AUX/TV
SOUND, the display changes in the display
window as follows.
- "AUX" when selecting the device
connected to the AUX IN terminals
- "SOUND TV" when selecting the TV
connected to the AV terminal.
- "AM" or "FM" when selecting AM or FM as
the source.
2
Play other audio devices.
For details, refer to the manual of the device
connected.
3
Adjust the volume and the
sound quality of the system
(A page 19).
Adjust the sound input
level of the audio device
You can adjust the sound input level of another
audio device connected to the AUX IN jacks.
1
Press FM/AM/AUX/TV SOUND
to select "AUX" on the display
window on the main unit.
2
Hold down MEMORY until an
input level is displayed.
Each time you hold down the button, it switches
as follows:
LEVEL 1: Select this normally.
LEVEL 2: Select this when the input level
The initial setting is "LEVEL1".
43
from the other device is too high
and the sound is distorted.

Auto Standby

If there is no operation for 3 minutes while the disc
is stopped, the power will be automatically turned
off.
You cannot use this function when a radio
broadcast, TV sound or a device connected to the
AUX IN terminals is selected as the source.
1
Press A.STANDBY.
"A.S.ON" (Auto Standby On) and "A.STANDBY"
will be lit on the display window on the main unit.
When a stopped state is entered (after playback is
finished, for example), "A.STANDBY" starts
blinking.
This means that the power will be turned off
automatically if there is no operation for 3 minutes.
And, 20 seconds before the power is turned off,
"A.S." will appear blinking.
Releasing Auto Standby
Press A.STANDBY.
"A.S.OFF" (Auto Standby Off) will appear and
"A.STANDBY" will be turned off on the display
window on the main unit.
NOTE
When the source is other than the disc, Auto Standby
does not work.