Basic Operations; Playing Discs/Files; Playback - JVC EX-AK1 Instructions Manual

Playing discs/files

Playback

• The power will be turned on when any of
, or on the main unit and
, or on the remote control is pressed
while the power is off.
If any button other than
the source will also be changed (if there is a disc
loaded, playback will start).
The following messages appear depending on the status of the system.
(These messages only appear when a loaded disc is selected as the source.)
NOW READING
REGION CODE
ERROR!
NO DISC
OPEN
CLOSE
CANNOT PLAY THIS
DISC
(Refer to page 20 for playing MP3/WMA/WAV/JPEG/MPEG1/MPEG2 file.)
A
page 5
1
2
Press 0 to open the disc tray to load a
disc.
3
Press DVD/CD 3.
The disc tray will close and playback will start.
,
,
or is pressed,
Screens displayed on the TV when the power is turned ON.
Appears when the system is reading the disc/file information. Wait for a while.
Appears when the Region Code of the DVD does not match the code the
system supports. (A page 3)
Appears when no disc is loaded.
Appears when opening the disc tray.
Appears when closing the disc tray.
Appears when trying to play back an unplayable disc.
Press F AUDIO.
• The power will be turned on and the STANDBY
lamp will go off.
• Press F AUDIO again to turn off the power.
NOTE
• A menu screen may be displayed after starting
playback of a DVD. In this case, select a desired
item to playback by using the following buttons on
the remote control.
• Select a desired item using
press .
• Select a desired item using the number buttons.
• Depending on the disc/file, actual operation may be
different from the description.

Basic operations

Place a disc with the label side
facing up.
•
Place an 8 cm disc in to the
hollow part in the cen ter.
and
14