BASic operAtion
turning on the tV
1
Firstly, connect the power cord correctly. At this stage, the TV switches to
standby mode.
2
In standby mode to turn TV on, press the poWer, tV/AV or p / button on
the TV or press the poWer, AV, tV/DtV, p / or nuMBer button on the
remote control and the TV will switch on.
changing channel
1
Press the p / button or enter the channel number using the nuMBer buttons to
move to the channel directly.
2
Press the tV/rADio button to switch between digital TV channels and radio
channels.
3
Press the tV/DtV button to switch between analog TV channels and digital TV
channels.
note: You can switch channels using the channel list or programme guide.
Volume control
1
Press the VoL+/- button to adjust the audio volume.
2
Press the Mute button to stop the audio temporarily.
note: The mute function remains set while you switch channels.
GB-6