Table of Contents
Advertisement
inStALLAtion WiZArD
Wizard for Analog channels (ApS)
Firstly, switch to Analog tV input mode using the AV or tV/DtV button.
When you perform the default setting in feature menu, the installation wizard for analog channels will appear
automatically. (Refer to p.6)
note: The default PIN code is 0000. If you have forgotten the PIN code, please contact your local TV distributor.
1
Shows the main language and country.
2
Select channel Search and press the oK button.
Please wait for finishing the channel search. If you want to stop
during search, press the BAcK button.
If the channel search is stopped or finished, you can edit the found
channels.
• Skip: Sets the channel to be skipped using the reD button.
• Move: Shifts the channel using the green button.
• Delete: Deletes the channel using the yeLLoW button.
note:
▪
If you do not want to setup the channels at this time, you can setup it later using the installation menu.
▪
If you connect an active antenna to the TV, you have to set the Antenna power to on to supply the 5V power into
antenna. The default value is off. Active antenna is a portable or indoor antenna which needs power supply from the
product because it does not have power cord for itself.
(in Analog tV Mode only)
A P S
Language
Antenna Power
Countr y
Channel Search
Analog Channel Found
Scan Progress 80%
Stop
English
O ff
UK
25
GB-15
Advertisement
Table of Contents
