Table of Contents
Advertisement
Cleaning and care
Cleaning the machine front
and the side panels
If soiling is allowed to sit for any
length of time, it may become im-
possible to remove.
Surfaces may be discolored or al-
tered.
It is therefore best to remove soiling
from the machine front and side pan-
els immediately.
All surfaces are easily scratched.
Contact with unsuitable cleaning
agents can alter or discolor the sur-
faces.
See the information on "Cleaning
agents" at the beginning of this sec-
tion.
Clean the surfaces with a clean
sponge and a solution of warm water
and washing-up liquid. A clean, damp
microfiber cloth without cleaning
agent can also be used for cleaning.
After cleaning, wipe with clean water
and dry with a soft cloth.
52
Appliance front
The appliance front has a special high-
quality finish (Clean Touch Steel) which
is resistant to soiling and is very easy to
clean.
Do not use stainless steel
cleaning agent on these surfaces,
as it will damage the finish.
Do not use Miele stainless steel
conditioning agent on these sur-
faces. This will cause noticeable
smearing.
Cleaning the door seal
If the door seal is damaged or
has come out of the groove, the door
will not close properly and this will
affect cooling.
Condensation will form in the inside
and this can cause a build-up of ice.
Do not damage the door seal, and
make sure that it does not come out
of its groove.
Do not use any grease or oil on the
door seal as this will cause the seal
to deteriorate and become porous
over time.
The door seal should be cleaned reg-
ularly with clean water and then
wiped thoroughly dry with a cloth.
Advertisement
Table of Contents
