Attaching The Cover; Finishing Component Removal - Fujitsu LIFEBOOK E548 Operating Manual

Removing and installing components during servicing

Attaching the cover

2 2
1
► Place the cover in the correct location (1).
► Tighten the screws (2).
The LIFEBOOK E548 has 2 screws, the LIFEBOOK E558 has 3 screws.
► Complete the installation, see "Finishing component removal", Page 70.

Finishing component removal

After you have removed or changed the system components as required, please
prepare your device for operation again as follows:
► Install the battery again, see "Installing a battery", Page 41.
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that were previously disconnected.
70 Fujitsu