Installing A Memory Module; Installing And Removing An M.2 Module (Dependent On Configuration) - Fujitsu LIFEBOOK E548 Operating Manual

Removing and installing components during servicing

Installing a memory module

1
Installing and removing an M.2 module
(dependent on configuration)
Your LIFEBOOK is equipped with a service compartment for an M.2 module. The LIFEBOOK E558
can be ordered either with an M.2 module or with a standard hard disk (HDD). For systems with
HDD, an M.2 adapter is available as an accessory, in order to retrofit an M.2 module instead of
the HDD, if necessary. For more information on how to install a hard disk, see
removing the hard disk (only for LIFEBOOK E558 with HDD configuration level)", Page
It is not possible to install a standard hard disk in systems that
were ordered with an M.2 module.
The LIFEBOOK E548 is illustrated below. The approach is the same for all
variants. Corresponding reference is made to any differences.
66
2
a
► Insert the memory module with the contacts
and the recess (a) forward in the slot (1).
Memory module Memory expansion
► Carefully push the memory module
downwards until you feel it click
into place (2).
"Installing and
68.
Fujitsu