Setting Up Wlan Access; Access Via Lte (Optional); Ethernet And Lan - Fujitsu CELSIUS H7510 Operating Manual

Setting up WLAN access

• Requirement: A WLAN must be available and you must have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating system.

Access via LTE (optional)

If you ordered an integrated LTE module with your system, you can enjoy optimum
reception and maximum energy efficiency without awkward cables or antennas. The
optional LTE module is ready for use straight away.
You will find information on establishing the connection with the LTE network in the
documentation for the hardware you plan to use.
Your device can connect with the Internet via LTE. To do this, use one of
the following types of connection:
• Integrated LTE module (depending on your model variant)
• a USB dongle (a USB stick with your mobile phone provider's SIM card)
• a mobile end-device (e.g. mobile phone with Bluetooth or cable connection)

Ethernet and LAN

EthernetLAN
The internal network module of your notebook supports Ethernet LAN. You can use it to
establish a connection to a local network (LAN = Local Area Network).
1
Your network administrator can help you to configure and use the LAN connections.
The network cable is not included in the delivery scope. This type of
cable can be obtained from a specialist dealer.
Use a shielded network cable (CAT 5e).
Fujitsu
► Connect the network cable to the LAN
port of the notebook (1).
► Connect the network cable to your
network connection (2).
2
Working with the notebook
41