JVC KW-V255DBT Instruction Manual page 41

Settings Settings
If [Android/Other] is selected in step 1:
The <Paired Device List> screen appears. Go to
step 3.
3
When selecting [Bluetooth] as the
connection method: Select the device (
then touch [OK] ( 2 ) to connect.
• If the device is already connected, skip step 1.
<Bluetooth Setup>
Configure settings for using a Bluetooth device, such
as connection and other general operations. For
details, see "Bluetooth settings" on page 29.
<Beep>
This setting is available only when 2-way speaker
system is selected. (Page 31)
• ON (Initial): Activates the key-touch tone.
• OFF: Deactivates the key-touch tone.
<SETUP Memory>
Memorize, recall, or clear the settings you have made.
• The memorized settings are kept even when the unit
is reset.
Touch [Yes] to display the setting screen, then select
1 ),
an operation:
• Recall: Recalls the memorized settings.
• Memory: Memorizes the current settings.
• Clear: Clears the currently memorized settings and
return to the factory (initial) settings.
• Cancel: Cancels.
A confirmation message appears. Touch [Yes].
<DivX(R) VOD>
This unit has its own Registration Code. Once you
have played back a file with the Registration Code
recorded, this unit's Registration Code is overwritten
for copyright protection.
• Touch [Enter] to display the information.
• To return to the previous screen, touch [OK].
<Initialize>
Initialize all settings you have made. Touch and hold
[Enter] to initialize the settings.
• After initializing the settings, adjust the settings on
the <Initial Settings> screen.
<Touch Panel Adjust>
Adjust the touch positions of the buttons on the
screen.
Touch the center of the marks at the upper left (1),
the lower center (2), then the upper right (3) as
instructed.
• To reset the touch position, touch [Reset].
• To cancel the current operation, touch [Cancel].
<System Information>
Update the system by connecting a USB device
containing an update file.
• To obtain the update file, visit
<http://www.jvc.net/cs/car/>.
Connect a USB device with the update file to the unit.
E.g. System settings screen for KW-V250BT
ENGLISH 37