D-Link DI-704 User Manual page 20

D-link di-704: user guide
Hide thumbs Also See for DI-704:
Table of Contents

Advertisement

4.4.1 Static IP Address
WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS: enter the proper
setting value provided by your ISP.
4.4.2 Dynamic IP Address
1.
Host Name: optional. Required by some ISPs, for example, @Home.
2.
Renew IP Forever: this feature enables the DI-704 to renew its IP address
automatically when the lease time is expired even if the system is idle.
4.4.3 PPP over Ethernet
1.
PPPoE Account and Password: the account and password your ISP assigned to you. If
you don't want to change the password, keep it empty.
2.
PPPoE Service Name: optional. Input the service name if your ISP requires it.
3.
Maximum Idle Time: the maximum time the connection is idle before you are
disconnected from your ISP and your PPPoE session is terminated.
4.4.4 Dial-up Network
1.
Dial-up Telephone, Account and Password: assigned by your ISP. If you don't want to
change the password, keep it empty.
2.
Primary and Secondary DNS: automatically assigned if they are configured as
"0.0.0.0."
3.
Maximum Idle Time: the time of no activity before you are automatically disconnected
from your dial-up session.
4.
Baud Rate: the communication speed between the DI-704 and your MODEM or ISDN
TA.
5.
Extra Setting: optional settings to optimize the communication quality between the ISP
and your MODEM or ISDN TA. Use if your ISP recommends and provides these
settings.
12

Advertisement

Table of Contents
loading

Table of Contents