Table of Contents
Advertisement
CHAP/PAP—The router will try CHAP first, but PAP
will be used if CHAP is not available.
CHAP—Use CHAP only.
None—No authentication required.
3. PPP Options: Compression—The setting in this field
determines if Stac compression will be used. The default
setting is Yes.
4. PPP Options: Mutual Authen.—Some vendors, e.g. Cisco,
implement a type of mutual authentication. That is, the node
that initiates the call will request a user name and password
from the far end that they are dialing to. If the Remote Node
that is dialing in implements this type of authentication, set
this field to Yes.
5. PAP Login—This field will only be enabled if the Mutual
Authen. field is set to Yes. Enter in the login name to be used
to respond to the far end's PAP authentication request. This
field does not apply to CHAP authentication.
6. PAP Password—This field will only be enabled if the Mutual
Authen. field is set to Yes. Enter in the PAP password to be
used to respond to the far end's authentication request. This
field does not apply to CHAP authentication.
7. Multiple Link Options: Max Trans Rate—Enter the
maximum data transfer rate between your router and the
Remote Dial-in User. The unit is in bits per second. There
are two options for this field:
64—At most, one B channel will be used.
128—A maximum of two channels can be used.
Dial-In Configuration
63
Advertisement
Table of Contents
