Table of Contents
Advertisement
Filter Rules—The filter rule parameters will be displayed
here (see below).
M—Refers to More. Y means there are more rules to check,
N means there aren't.
m—Refers to Action Matched. F means to forward the
packet, D means to drop the packet, and N means check the
next rule. The Action Matched control has no effect when the
More control (see preceding) is set to Y.
n—Refers to Action Not Matched. F means to forward the
packet, D means to drop the packet, and N means check the
next rule. The Action Not Matched control has no effect
when the More control is set to Y.
If the filter type is IP (TCP/IP), the following abbreviations will be
used:
Pr—Protocol.
SA—Source Address.
Filter Configuration
99
Advertisement
Table of Contents
