Table of Contents
Advertisement
14. Log—In this field, you can determine if you wish to log the
results of packets attempting to pass the filter rule. These
results will be displayed on the System Log (see the Log and
Trace section on page 126). There are 4 options for this field:
None—No packets will be logged.
Action Matched—Only packets that match the rule
parameters will be logged.
Action Not Matched—Only packets that do not match the
rule parameters will be logged.
Both—All packets will be logged.
15. Action Matched—If the conditions for the filter rule are
met, you can specify what to do with the packet. There are
three options for this field:
Check Next Rule.
Forward.
Drop.
16. Action Not Matched—If the conditions for the filter rule are
not met, you can specify what to do with the packet. There
are three options for this field:
Check Next Rule.
Forward.
Drop.
Once you have completed filling in Menu 21.1.1—TCP/IP Filter
Rule, press ENTER at the message 'Press ENTER to Confirm...'
to confirm your selections, or press ESC at any time to cancel your
104
Filter Configuration
Advertisement
Table of Contents
