Swann DVR16-4550 User Manual page 24

Creating a Preset
1.
Use the PTZ controls to move the camera to the desired focal position.
The Zoom and Focus controls can also be used.
2.
Click the "Preset" button to access the Preset menu.
3.
Click the first Preset slot available then click "pos1" to change the
name to something more relevant (you can leave the default name if you
wish).
4.
Click the "Set" button to save (this will change from No to Yes).
5.
Click "OK" to exit.
Repeat the above steps to create multiple Preset positions. Make sure
you change the Preset slot for each Preset that you want to create. Up
to 128 different Preset positions can be created.
Back to top
3
1
2 4 5
Call:
Select a saved Preset slot then click this to move the camera to the
Preset position.
Clear All:
Click this to clear all Preset slots.
Clear:
Select a saved Preset slot then click this to clear.
22