System Agent (Sa) Configuration; Pch Configuration; Pch Storage Configuration; Pch-Fw Configuration - Asus STRIX B250H GAMING Manual

Table of Contents

Advertisement

CFG lock [Disabled]
This item allows you to enable or disable the CFG lock. Configuration options:
[Disabled] [Enabled]
3.6.3

System Agent (SA) Configuration

The items in this menu allow you to adjust the Link Speed for PEG Port and Multi-Monitor.
3.6.4

PCH Configuration

PCI Express Configuration
This item allows you to configure the PCI Express slots.
PCI-E Speed [Auto]
This item allows your system to automatically select the PCI Express port speed. When
set to [Gen1], the PCI-E port runs at PCI-E 1.0 speed. When set to [Gen2], the PCI-E
port runs at PCI-E 2.0 speed. Configuration options: [Auto] [Gen1] [Gen2]
3.6.5

PCH Storage Configuration

While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Empty if no SATA device is installed to the corresponding SATA port.
SATA Controller(s) [Enabled]
This item allows you to enable or disable the SATA device. Configuration options: [Enabled]
[Disabled]
SMART Self Test [On]
SMART (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that
shows a warning message during POST (Power-on Self Test) when an error occurs in the
hard disks. Configuration options: [On] [Off]
Hot Plug [Disabled] (SATA6G_1 (Gray) ~ SATA6G_6(Gray))
These items allow you to enable/disable SATA Hot Plug Support. Configuration options:
[Disabled] [Enabled]
3.6.6

PCH-FW Configuration

This item allows you to configure the firmware TPM.
3.6.7

Onboard Devices Configuration

HD Audio Controller [Enabled]
This item allows you to use the Azalia High Definition Audio Controller. Configuration options:
[Disabled] [Enabled]
ASUS STRIX B250H GAMING
3-13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents