Onboard Leds; Internal Connectors - Asus STRIX B250H GAMING Manual

1.1.7

Onboard LEDs

1. Standby Power LED (SB_PWR)
The motherboard comes with a standby power LED. The LED lights up to indicate that
the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should
shut down the system and unplug the power cable before removing or plugging in any
motherboard component. The illustration below shows the location of the onboard LED.
STRIX B250H GAMING Onboard LED
1.1.8

Internal connectors

1. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports HD
Audio. Connect one end of the front panel audio I/O module cable to this connector.
STRIX B250H GAMING Front panel audio connector
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard's high-definition audio capability.
1-10
SB_PWR
ON OFF
Standby Power Powered Off
AAFP
PIN 1
HD-audio-compliant Legacy AC'97
pin definition compliant definition
Chapter 1: Product Introduction