Connecting Cables To The Computer - Fujitsu B34-9 UE Operating Manual

► Insert a plug from the data line into the DP socket or one of the HDMI connectors of the monitor.
The monitor automatically detects the input when only one signal source is connected.
► Plug the supplied power cable into the DC socket of the monitor.
► Plug the supplied USB cable into the USB IN socket and the other end of
the cable into a USB socket of the computer.
Connect the USB keyboard and mouse directly to the PC, as the USB connection
socket of the monitor is turned off in power-saving mode where possible.
A lock (Security Lock) can be mounted in the security slot to protect the monitor
against theft. A Security Lock is not included with the monitor at delivery.

Connecting cables to the computer

Information on the computer connections and interfaces is contained in the
operating manual for your computer.
► Connect the data cable to the (active) monitor port on the computer and secure
the plug-in connection by tightening the safety screws.
► Plug the mains plug of the power supply into a properly grounded mains outlet.
► Plug the power connector of the computer into a properly grounded mains outlet.
If your computer has two monitor ports ("onboard" screen controller and separate
graphics card), the monitor port for the separate graphics card is active as standard.
Fujitsu
Getting started
17