Charge The Handset - BT 1200 User Manual

4 Plug the power cable
into the back of the base
unit
Plug the adaptor cable into the
socket on the back of your
Freestyle 1200.
Warnings
Do not try to use any power supply
1
other than the one provided. This
may permanently damage your
Freestyle 1200.
Your Freestyle 1200 should not be
2
fitted in wet or damp conditions, for
example in a bathroom. Also, the
handset should not be left out in
the rain.
There is a slight chance that your
3
phone could be damaged by an
electrical storm. We recommend
that you unplug the base unit from
the mains during storms.
12V AC
PHONE LINE
5 Connect the base unit
three-pin adaptor to a
power socket
The unit will alternatively display
and C L flashing slowly. The internal
clock will automatically be set to
Saturday 12:01pm. To change the
day and time, see page 21.
Mains power adaptor
The Freestyle 1200 must only be used
with the adaptor supplied.
Using any other adaptor will result in
non-compliance with EN60950:1992,
and will invalidate the approval given
to this apparatus.

6 Charge the handset

When you first use your Freestyle
1200, the rechargeable battery in the
handset needs charging for 24 hours.
Make sure you have connected
•
your Freestyle 1200 to the mains
power supply; see steps 4 and 5.
Place the handset on the base
•
unit, ensuring the contacts are
touching. The red
light comes on.
The
•
CHARGING
on while the handset is on the
base unit.
When sufficiently charged for use,
•
the
CHARGING
Setting up
CHARGING
light remains
light turns green.
--
7