Setting The Day And Time - BT 1200 User Manual

DELETE
Press the
• DELETE
the message is being played. The
message stops playing and the
machine announces: "Your outgoing
message is..." and the pre-recorded
outgoing message is played.
Additional pre-set
messages
In addition to the preset outgoing
message, your Freestyle 1200
provides set outgoing messages for
various situations.
When the maximum recording
length of 3 minutes for each call
has been reached the caller hears,
"Thank you for calling." before the
line is disconnected.
When there is less than 40 seconds
recording capacity left, your caller
hears: "Please complete your call
within 'x' seconds."
When the recording memory is full
or there is less than 15 seconds
recording capacity left, your caller
hears: "Hello, your call cannot be
taken at the moment and you cannot
leave a message so please call later."
button while
Using your Freestyle 1200 answering machine
When the recording capacity is full,
your caller hears: "Thank you for
calling."

Setting the day and time

Your Freestyle 1200 automatically
adds the day and time to all
messages and memos.
When you switch on your Freestyle
for the first time, the clock is set to
Saturday 12:01. You can change the
day and time as required. The
display will show CL until the clock
has been set.
To set the day and time
Remove the battery cover lid to
•
access the appropriate buttons.
DAY
Press and hold the
•
The currently set day is announced.
Release the
• DAY
STOP
Press the |
•
the day you want is announced.
CODE/SET
Press the
• CODE/SET
machine announces "(Day) set".
button.
DAY
button.
or | button until
button. The
21