Table of Contents
Advertisement
4.3.2.
Installation of the Decoration ring
1. Please insert the pins of the Decoration ring to the holes
of the Filter ring.
• Use new one, do not use the one which is removed.
• Double-stick tape sticks to the Decoration ring of there-
pair part.
Please remove the old double-stick tape from the Lenstop
unit.
2. After installing the Decoration ring, use a soft cloth to
press it into place.
4.3.3.
Installation of the 1st lens holder
unit and the Cam barrel unit
1. Align phase marks( ) and rotate the Cam barrel unit unti-
clockwise when you watch it from back.
4.3.4.
Installation of the Ring mount base
unit
1. Tighten 3 screws (H) in numerical order by using the
torque driver with specified torque.
(Torque Driver : RFKZ0456)
(Torque : 7±1N ･ cm)
16
Advertisement
Table of Contents
