Security Codes; Phone Password; Center Access Code - SoftBank 820SC User Manual

System Sounds
Available items vary by mode. Volume level set in
1
System sounds applies to all Phone sounds.
Item
All Check/uncheck all items.
Sounds for confirmations/
Popup box alerts
warnings.
Sounds about once a minute
Minute minder
during calls.
Sounds before called phone
Call connect tone rings to notify the call is going
to be connected.
Call end tone Sounds when a call ends.
Sounds when the power is
Power on
turned on.
Sounds when power is turned
Power off
off.
Sounds when 820SC is
Open/Close folder
opened/closed.
Sounds for alarms/incoming
Alerts on call
transmissions during a call.
1-16
Advanced
s
Adjust volume (
●
Set Ringtone for Voice Call/Video Call/S! Circle Talk
●
Description
r
( P.13-14)
Set ringtone other than Voice Call (
●
Set ringtone duration other than Voice Call
●
r
( P.13-14)
Set Vibration (
●
Set Keypad tones (
●
Set system sounds for S! Circle Talk (
●
Set system sounds (
●
Illuminate External Light for incoming transmissions
●
r
( P.13-14
Illuminate External Light for missed calls (
●
P.13-15)
Set Answering Machine (
●
Activate or cancel Offline mode (
●
Activate or cancel automatic ringer reduction
●
r
( P.13-25)
Change mode (
●
r
P.13-14)
r
P.13-14)
r
,
P.13-14 P.13-15)
r
P.13-14)
r
P.13-14)
r
P.13-14 , P.13-15)
, P.13-15)
r
,
P.13-14
r
P.13-15)
r
P.13-25)
r
P.13-26)

Security Codes

Phone Password, Center Access Code and Network
Password are required are required to use 820SC.

Phone Password

The 4-digit number (9999 by default) is required to
operate/change some handset functions.
Entered Phone Password digits are represented with
●
If incorrect, an error message appears. Try again
●
Phone Password can be changed on 820SC
●
f
( P.11-2).

Center Access Code

4-digit number specified at subscription; required
to change service subscriptions or to operate
handset from landlines.
.
*