Initiating S! Circle Talk - SoftBank 820SC User Manual

Initiating S! Circle Talk

Upon initiation, registration confirmation appears.
Save members or groups to members list to begin
use.
n
a
Members Window
Select Save now or Save later. For Save
●
now, member is saved immediately
f
( P.10-9).
b
Select member or group from
S! Circle Talk members
■ To select a member or group
Select a member or group directly
■ To select multiple members or
groups
w (Multiple) → Check members or
groups to call → w (Call)
c (Call) or t
c
When a member connects, S! Circle Talk
●
starts.
Talk while holding c (
d
n
Talk while appears.
●
All members can hear speaker.
●
Talk for 30 seconds at a time. After 30
●
seconds, alert beeps and session ends.
Warning appears five seconds before session
●
ends.
To talk again, press c (
e
or n while Press
appears
) or
While a member is talking, a message
●
appears and other members cannot talk.
To end S! Circle Talk, y
f
When only one member remains, S! Circle
●
Talk ends.
In S! Circle Talk, press w (
●
Loud speaker On or Off.
Note
If a call is received in S! Circle Talk, 820SC
●
follows Incoming Calls setting (
If Alarm time arrives in S! Circle Talk, Alarm
●
sounds and indicator appears. Press c
(OK) to clear Alarm.
)
to speak
/ ) to toggle
10
f
P.10-14).
10-7