Alarms; Setting Alarms - SoftBank 820SC User Manual

Alarms

Save up to five Alarms. Use Alarm activation to
activate or cancel alarm settings. Set alarms to
repeat on specific days of the week or everyday.

Setting Alarms

Example: Setting Alarm time
c → Tools → Alarms
a
9
b Select from Alarm1 to
Alarm5
9-2
c
Enter Alarm time
w (Save)
d
During a call or while dialing (Connecting...
●
appears), a tone sounds and an indicator appears.
While dialing (Dialling... appears), an indicator
appears. When Alerts on call on System sounds
is unchecked, only indicator appears during a call
or connection. Press any key twice to clear
indicator. When Snooze is set to other than Off,
press o (End) and then press c (OK).
When Alarm is set, appears in Standby.
●
If multiple alarms are set for the same time, first
●
one set sounds first. If Schedule or Tasks alarm is
set for the same time as Alarm (Tools), Alarm
sounds first.
At Alarm Time, tone sounds and indicator appears.
●
Handset vibrates if Vibration is not Off. Press any
key to stop Alarm. Press again to clear indicator.
When Manner mode is active, setting in For
●
f
manner mode (
P.9-17) applies.
If Camera or Voice Recorder is active at Alarm
●
Time, Alarm sounds upon operation termination.
Advanced
brP.9-17
Setting Volume or Vibration in Manner Mode
●